Weekly Roundup #38 - New Maker Products // News


YouTube video: Weekly Roundup #38 - New Maker Products // News


This week’s Weekly Roundup shows us lots of FPGA boards, more ESPs and the demise of a Polymath, Inventor and a random guy getting annoyed at caloric theory.

ERROR:not .src - map[alt: class: control: ctx:0xc00e00a140 height: href: id:gmptVkSPKCU inline: size: span: src: style: thumbnail: title: width: xml:]

Crowd Funding

KickStarter

Not many things on Kickstarter this week.

2017 WiFi Badge

If you’re going to DefCon at the end of July this year in The States, then you can pick up an unofficial DefCon 2017 badge on Kickstarter for around $US45 .

DC Crank Set

This next campaign is a small one from someone who’s created 22 already on Kickstarter. It’s a simple board that provides regulated 3.3 and 5 volt outputs from a mechanical crank, allowing you to power an Arduino or even a Raspberry Pi. Great idea.

SunControl

While we’re on the topic of alternative power, here’s another Kickstarter for a solar powered battery management board. This board is capable of providing a 1A charge current for LiPos, as well as a constant 1A 5v USB port. You can query the board from a USB port so you can shutdown safely when battery is low.

Decaf USB Smart LCD

The Decaf is a smart LCD screen that’s based on the PiXCL, which is an interpreted language that allows you to build real time control applications. This first batch of boards are based on a Cortex-M3 with SPI flash, LCD touch screen and USB that allow you to interact with sensors, buttons and switches.


IndieGoGo

While surprisingly over at IndieGoGo there is…

IntoRobot IoT development kit

… this IoT development kit comes in three “flavours”. The IntoRobot Fig, Fox and Ant. The Fig contains an ESP32, CP2104 chip and light sensor. The Fox is the same, but with an STM32 and SIM800C GSM module. while the Ant uses an STM32 along with a LoRa module. All of them have UFL antenna connectors as well as onboard antennas and break out all the GPIOs from the MCUs. They also have an API that works with their IntoRobot Cloud service that allows you to code and program from the Internet.


Crowd Supply

A couple of things on CrowdSupply this week, but I’ve only included one in this video.

NanoEVB

The NanoEVB is yet another FPGA board. This one is based on the Xilinx Artix FPGA in a handy M2 key format. This will be one to watch when it goes live.


Honorable mentions

EOL of Galileo, Edison & Joule

So, you would have heard by now how Intel has taken a step back from the Maker market by making the Galileo End Of Life, Joule and Edison boards. A bit of a shame. However, they are continuing with their Curie, which is good news for UDOO, since their x86 board has only just come out with a Curie.

2017 Hackerboard survey

The results from the Hackerboard survey are out….. No surprises that the Raspberry Pi is dominating the top three spots, however, it’s clear that the x86 camp has started to make a dent in the mainly ARM based lineup. I’m predicting that by next year we’ll be seeing at least 3 X86 boards on this top list and possibly 4. So, if you’re watching this video sometime in 2018 you can either laugh at me hysterically or nod in agreement.

DART-6UL-5G

Back in a previous Weekly Roundup, I mentioned the DART-6UL board that was selling for around $US24 . Now we have the DART-6UL-5G which adds a dual-band WiFi & Bluetooth module.

ESP32-GATEWAY

Olimex now have a fairly cheap ESP32 based board that provides not only the on-board WiFi and Bluetooth module, but a 100MbE port and micro uSD slot. It’s aimed at people wanting to create IoT gateways.

MXChip AZ3166 IoT Developer Kit

This is one topic we were recently talking about on the MickMake Patreon slack channel. Microsoft is starting to be one of the “cool guys” again and have released the MXChip IoT developer kit. This board contains an EMW3166 WiFi module, STM32, OLED display, audio processing chip and a whole bunch of sensors. all running off a USB port. If you want to get a preview board for free, then you can sign up here.

IceZero Lattice iCE40

The IceZero is yet another FPGA board hitting the market. This one is based on the Lattice ICE40HX and is designed to fit on to a Raspberry Pi Zero. This means you can do all your development right from the Pi Zero. The only issue I see is that they haven’t broken out all the GPIOs that this FPGA is capable of doing.

iCE40HX8K-EVB

Olimex has also joined in with a bunch of boards based on this same FPGA, This one has a handy edge connector that allows you to slot in a range of add-ons, such as ADC or DAC boards and analog or digital IO boards.

LPCXpresso845-MAX

Inforce 6309 Micro SBC

I saw over at CNX software that the Inforce 6309 SBC is on sale at the moment. All you have to do is enter in “summer” as the discount code on checkout and you can pick one up for only $US89.

LoRa® Explorer Kit

The Telco Orange must have read too many kids books as they’ve just released a board called the LoRa explorer kit. It is on the expensive side, but for around 84 euros you get a SAMD21, RN2483 LoRa module, RN4871 Bluetooth module, Atmel crypto chop, 4Mbit flash and rechargeable LiPo coin cell. You also get 6 months free access to Orange’s cloud service.

Phone touch screen for OPi 2G-IoT

While a different kind of Orange company seems to have found a large stock of mobile phone screens and have released them as an add-on for your Orange Pi 2G-IoT.


Maker Shops

Tindie

Some good stuff on Tindie again.

WiFi Packet Monitor

This one looks pretty cool. It’s an ESP8266 with OLED that allows you to do funky things like monitor the number of packets being sent on a WiFi network. It’s not limited to one network either! Good tool for checking WiFi accessability while on the run.

ERM Haptic Pack

If you have a project that needs haptic feedback, then this Tindie store has several kits ranging from this ERM haptic pack with 8 arrays and 10 vibrators or this Piezo based pack with 4 drivers and 10 piezos or this LRA pack with 4 drivers and 5 LRAs. They seem expensive, but you’re getting a lot within the packs.

Explore Cortex M3

Haven’t seen many LPC1768 based boards around. This one has the Cortex-M3 MCU, USB and JTAG connectors running off a 9v 1A DC jack and breaking out pretty much all the GPIOs on this MCU.

Waterproof I2S MEMS mic

This is a simple but neat idea. This guy has taken several AdaFruit MEMS mics and embedded them in resin to make them waterproof. Great idea if you have them exposed to the elements.

Octosonar v2

Red Hunter is back again with an update to his Octosonar. Version 2 now has better signal processing, a better library and 3.3 volt logic level support.

ESP Everywhere

ESP everywhere is now on Tindie. This was a Kickstarter campaign that ended up being fairly popular. This is just for the plain board where you’ll have to try your hand at soldering SMDs.

Arcade Joystick Controller

And this board is pretty simple, but something that you’ll really need if you’re wanting to get into retro Arcade machines. It allows you to easily connect up joysticks and buttons to an Arduino.

USB Inspector

And this board is useful if you’re doing any diagnostics on the USB bus, allowing you to insert an Amp meter and connect up logic probes to the USB.


AdaFruit, Seeed, SparkFun, DFRobot, DigiKey

SDRPlay Radio Spectrum Processor 2

Over at Seeed Studio they have an SDR that is capable of operating between 1kHz to 2GHz : has a number of other features like 10 preset filters, low noise preamp, 10MHz bandwidth and running the SDRuno firmware.

ARTIK 053 starter kit

They also have several Artik kits, like this 053 starter kit in an Arduino form factor or this 530 starter kit with onboard 4core Cortex-A9 and 512MB RAM, or this 710 starter kit with onboard 8core Cortex-A53 with 1G RAM and 4G flash. All three provide you connectivity to WiFi, Bluetooth, ZigBee and Thread networks.

VGA to HDMI Audio and Video Adapter

Sometimes you just have no choice but to use VGA. This handy box from AdaFruit converts a VGA input signal into HDMI out. Nice.

tinyTILE

While over at SparkFun, they have the tinyTILE, which is a Curie based board. Probably the smallest Curie board I’ve seen. For those who don’t know about the Intel Curie. It’s a dual core MCU with a small x86 Quark and ARC cores, running at 32MHz with 384kB flash, 80kB RAM, Bluetooth, 6DOF IMU and onboard PMIC. It’s a pretty cool chip. Glad Intel didn’t get rid of it.

SparkFun weather:bit

If you have a micro:bit, then SparkFun have a couple of add-ons. This weather board has onboard temperature, humidity, pressure and light sensors and connectors for wind speed, rainfall and soil sensors.

SparkFun moto:bit

Or this moto:bit board which has two Hbridges allowing control over DC or stepper motors. Also has onboard battery management.

IR Scanner Kit

Over at DFRobot they have a fairly cheap IR based scanner that can scan up to 120 degrees at 170mS every 60 degrees at 100 to 800 mm range.

DE-LIDAR TF01 Laser Rangefinder

And prices of laser rangefinders are getting lower and lower. $US139 is still a fair whack, but the TF01 has a range of up to 10m at 500Hz sampling frequency.

OpenScope

Looks like DigiKey will be getting in the Digilent OpenScope soon, which was a successful Kickstarter campaign. No info on pricing yet.

Inky pHAT

Pimoroni have a neat Pi Zero based e-ink display that’s capable of displaying red, black, and of course white, at 212 by 104 pixels. They have a fairly decent Python library as well.


The Cheap Side

Passive component boxes

BangGood have a bunch of cheap passive component boxes ranging from capacitors, transistors and resistors.

WeMos® LOLIN32

And this WeMos ESP32 board with LiPo battery management, breaking out all the GPIOs.

ESP32 test/batch burn

If you buy your ESP32s as bare modules, then you really need to get one of these. Just plonk your ESP module in and program away.

W8Y2 transistor tester

Got a bunch of transistors and not sure if they do or don’t work ? This transistor tester looks decent, although I haven’t yet tried it out. Runs off a 6 to 12 volt DC supply and has a snazzy LCD display for testing NPNs, PNPs, FETs, diodes, thyristors and SCRs. I think I might pick one of these up.

PAM8610 digital amplifier

The PAM8610 is a step up from the PAM8403s. Runs off a 6 to 15 volt supply, so isn’t quite suitable for MCU work, but is more responsive than the 8403s.

Coin slot board

Man, I’ve just gotta get one of these! This is a full coin slot mechanism with control board as you’d find on vending machines. It’s actually a time control board, but I’ll be able to retro fit it on to an ESP and a mechanical lock so I can charge my teenagers every time they open the fridge door. Nice.

CC2640R2F

ICstation have a neat CC2640 based Bluetooth board, which is similar to the CC2240, but with a faster MCU, more flash and GPIOs.

Wireless parking detection system

Another cool toy. This is a vehicle detector used in parking lots to highlight free car spots. Wouldn’t mind getting one of these so I can check if any cars are in my driveway before I even get home. There’s also this cheaper module.

SupTronics X820 SATA expansion for Pi

You would have seen the X800 SATA expansion board in my previous weekly roundup. DC now have the X820, which is similar to the X800 but with an additional USB3 port. Not sure that’s going to help as it’s sitting on a USB hub, but anyway…

SupTronics X850 mSATA expansion for Pi

There’s also the X850, which is designed for mSATA drives. It’s basically a USB2.0 to mSATA converter in a format that can easily attach to a Pi.


Honorable mentions

A few bits and pieces that I didn’t include in my video.

Obsidian 3D Printer

A 3D printer for $99! Too good to be true? Who knows?

XY Multi Platform

WYA3DP - Yet Another 3D Printer! This one around the 499 GBP mark.

Trium Delta 3D Printer

Or this one around the 250 euro mark, based on the Delta design.

$95 3D Printer WiFi and Auto Bed Leveling

Another very cheap 3D printer. Only $95!

RADIK

Will they never end?

Scribbler DUO

Q.bo One

theMikeybot

theMikeybot - a cheap wireless robot for families and schools controlled using block programming from any computer.

Very Useful Circuits

Very Useful Circuits: learn the basics of electrical engineering through practical, hands-on soldering projects.

layerOne 2017 Electronic Badge

If you missed the LayerOne security conference last month you can still pick up a conference badge. Based on the STM32 it also has SD slot, 2.4" LCD and CAN transceivers.

SparkFun gamer:bit

The SparkFun gamer:bit is a fun-filled “carrier” board for the micro:bit

SparkFun micro:arcade

With the micro:arcade kit you will be able to turn a classic controller into an arcade cabinet by connecting just a few buttons and switches.


Related

Mick Hellstrom avatar
About Mick Hellstrom
Hacker. Maker. YouTuber.

MickMake forums